Fresh Jobs 4 U

Latest Government Jobs

Telangana PSC AEE Exam Pattern Syllabus Download Admit Card – Advt No.08/2015

The Telangana State Pradesh Public Service Commission (TSPSC) was constituted under Article 315 (1) of the Constitution of India vide orders issued by Government of Telangana in G.O.Ms.No: 43 GA Department dt: 08/08/2014. One of the primary functions of the Commission is to select the best suitable candidates for various Government Posts in Telangana State. TSPSC released a notification in their official website for Telangana PSC AEE Exam 2015. Many interested and eligible candidates applied for the post after saw the notification. TSPSC is going to conduct Telangana PSC AEE Exam 2015 in the month of September 2015. So the candidates who applied for the above mentioned posts were waiting for Telangana PSC AEE Exam Pattern Syllabus Download Admit Card to know about time, venue and date of the examination and to do preparation for the examination. So this is good news for all awaited candidates that TSPSC has been uploaded Telangana PSC AEE Exam Pattern Syllabus Download Admit Card in their official website. So the candidates who were waiting for Telangana PSC AEE Exam Pattern Syllabus Download Admit Card, they can download Telangana PSC AEE Exam Pattern Syllabus Download Admit Card from the official website of TSPSC.

Telangana PSC AEE Exam Pattern Syllabus Download Admit Card

Admit Card: – Applicants who applied for Telangana PSC AEE Exam 2015 for and waiting for Telangana PSC AEE Exam Pattern Syllabus Download Admit Card, they can get their admit cards through online from the official website of TSPSC. TSPSC has been uploaded Admit Card of the examination in their official website. It is mandatory to download the admit card because applicants get the permission to enter in the examination center and give their exam only through their own admit card. In their admit cards applicants will get some important information like their examination centre, roll number, date and time, rules and regulation of the exam with their own details like name, registration number etc. Candidates must carry print out of their admit cards/e-admit cards along with original valid photo id at the time of examination.

Exam Pattern: –

  • The examination will consists Multiple Choice Questions (MCQs)
  • There will be two papers in the Exam
  • Total of 300 Questions for 450 Marks
  • Candidates who will qualify in written test are called for Interview
  • Interview will be of 50 Marks

Exam Syllabus: –

Paper-I GENERAL STUDIES AND GENERAL ABILITIES: – 150 Questions of 150 Marks (Time – 2:30 Hours)

  • Current affairs – Regional, National and International.
  • International Affairs.
  • General Science; India’s Achievements in Science and Technology.
  • Environmental issues; Disaster Management- Prevention and Mitigation Strategies.
  • Economic and Social Development of India and Telangana.
  • Physical, Social and Economic Geography of India.
  • Physical, Social and Economic Geography and Demography of Telangana.
  • Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.
  • Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.
  • Indian Constitution; Indian Political System; Governance and Public Policy.
  • Social  Exclusion;  Rights  issues  such  as  Gender, Caste,  Tribe,  Disability  etc.  and inclusive policies.
  • Society, Culture, Heritage, Literature of Telangana.
  • Policies of Telangana State.
  • Logical Reasoning; Analytical Ability and Data Interpretation.
  • Basic English. (10thclass Standard)

PAPER-II: CIVIL ENGINEERING (DEGREE LEVEL): – 150 Questions of 300 Marks (Time – 2:30 Hours)

Building Materials And Construction: Bricks– Types of Bricks, Indian standard classification, properties; Stones – Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying; Cement – Different grades and types of cement, properties and IS specifications; Aggregates – coarse and fine aggregate, properties and IS specifications; Cement Mortar –Proportions of cement mortar for various applications; Concrete –Constituents of Concrete, Different grades of Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete; Admixtures – Types of Admixtures.

Strength of Materials And Theory of Structures: Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr’s circle of stress, Theory of bending and bending stresses; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending. Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani’s methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.

RCC and Steel Structures: Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method – Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory. Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis, Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre-stress, classification of pre-stressing system; Analysis of PSC Sections.

Fluid Mechanics and Hydraulics: Fluid Properties; Measurement of Pressure – Manometers; Fluid Kinematics –Classification of Fluids, Stream function and Velocity potential, significance and use of Flow nets, Fluid dynamics – Continuity equation, Bernoulli’s equations and Impulse momentum equation; Laminar and Turbulent flow through pipes – significance of Reynolds number, Hagen – Poiseuille’s equation, Darcy – Weisbach equation, Friction factor, Water hammer phenomenon; Compressible flow– Bernoulli’s equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels; Gradually varied flows – significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges; Boundary layer – Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws; Hydraulic Turbines – classification, Velocity triangles, principles and design of reaction and impulse turbines; Centrifugal pumps – specific speed, work done and efficiency, characteristic curves.

Hydrology and Water Resources Engineering: Hydrological cycle; Rainfall – types and measurement, network design; Infiltration – Ф-index; Runoff – process, factors and determination of runoff, dependable yield; Floods –flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel’s extreme value methods; Groundwater – types of aquifer and properties, Darcy’s law, specific yield, steady radial flow to wells in confined and unconfined aquifers; Irrigation – types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects; Dams – classification, forces and design of Gravity dam and Earth dam; Spillways – types, energy dissipation, stilling basin, Appurtenances; Canals –alignment, Kennedy’s and Lacey’s theories, lining of Canals; Weirs – components, design of vertical drop and sloping glacis weir; Seepage forces – Bligh’s Theory, Khosla’s theory; Canal falls – types and design principles; Cross drainage works –classification and design principles of aqueducts; Hydropower – classification and principle components of Hydroelectric power plants.

Environmental Engineering: Water supply – objectives, rate of demand, population forecasts; Analysis of water classification, design of coagulation, sedimentation, filtration, disinfection and softening processes; Methods of layout of distribution pipes– Hardy cross method; Waste water engineering – systems of sewerage, hydraulic formulae and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal; Treatment of sewage –principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks; Municipal solid waste characteristics, collection and transportation of solid wastes; Air Pollution types and sources of pollutants, air quality standards; Noise pollution – Impacts and permissible limits, measurement and control of noise pollution.

Transportation Engineering: Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient; Grade compensation; Traffic Surveys–speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000; Intersection – at grade and grade separated; Channelization; Rotary intersection; signal design – web star method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts.
Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.
Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.

Soil Mechanics and Foundation Engineering: Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability;
Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils; swelling and its preventions; Coffer dams, Caissons, Dewatering, Bracing for excavations, New mark charts, machine foundations.

Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods, Engineering Geology, Applications for Tunnels, Dams and Reservoirs, Geological hazards and preventive measures.

Estimation, Costing and Construction Management: Abstract estimate: Detailed estimate – centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard, General Specifications –Earth Work, Brick/ Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, color wash; Standard schedule of rates, lead and lift, preparation of lead statement; Computation of earth work – Mid-ordinate, Mean Sectional area, Trapezoidal method, Prismoidal Rule; Approximate estimate – Plinth area and cubic rate estimate.

Surveying: Principle and classification of surveying, chain surveying; Compass surveying; Leveling and contouring; Theodolite surveying; curves; Introduction and Fundamental concepts of electronic measuring instruments – EDM, Total station, GIS & GPS.

How to Download

Candidates can follow some steps which are given below to download Telangana PSC AEE Exam Pattern Syllabus Download Admit Card:

  • Visit the official website of Telangana PSC
  • For Admit Card – Search and Click on the link of Telangana PSC AEE Exam Admit Card 2015 (OR) Go to the direct link to download Admit Card
  • Fill the required details and Download the admit card as per given instruction
  • Take the print out of the admit card for the examination
  • For Exam Pattern and Syllabus – Search and Click on the link of Telangana PSC AEE Exam Pattern Syllabus 2015
  • Check/Download Exam Pattern and Syllabus

To get more information about Telangana PSC AEE Exam Pattern Syllabus Download Admit Card visit official website of Telangana PSC

Leave a Reply

Your email address will not be published. Required fields are marked *

Fresh Jobs 4 U © 2015 sitemap